APS-1000-12 Power Inverter


Request a Quote

    Quick Quote Request


    Input Wave Form: Sine Wave (Utility or Generator)
    Nonimal Voltage: 120VAC
    Low Voltage Trip: 85V±4%
    Low Voltage re activate: 95V±4%
    High Voltage Trip: 140V±4%
    High Voltage re activate: 135V±4%
    Max Input AC Voltage: 150V
    Nominal Input Frequency: 50Hz or 60Hz (Auto detect)
    Low Freq Trip: 40Hz for 50Hz and 50Hz for 60Hz
    High Freq Trip: 55Hz for 50 Hz and 65Hz for 60Hz
    Output Wave Form: (inverter mode) Same as Input
    Overload Protection: Circuit Breaker
    Short Circuit Protection Circuit Breaker
    Transfer Relay Rating: 30amp
    Efficiency on Inverter Mode: 0.95
    Input to Inverter Switch Time: 10ms Typical
    Bypass without battery connected: Yes
    Max bypass current: 30amp
    Bypass over load current: 35amp
    Inverter Specification Output
    Output Wave Form: Pure Sine Wave
    Output Continuous power Watts: 1000
    Output Continuous power VA: 1000
    Power Factor: 0.9
    Nominal Output Voltage RMS: 120VAC
    Output Voltage Regulation: ±10% RMS
    Output Frequency: 50Hz ± 0.3Hz or 60Hz ± 0.3
    Nominal Efficiency: >85%
    Surge Rating: 3000Watts
    Short Circuit Protection: Yes, Fault after 10 secs
    Inverter Specification Input Low Voltage
    Nominal Input Voltage: 12VDC
    Minimum Start Voltage: 10VDC
    Low Battery Alarm: 10.5VDC
    Low Battery Trip: 10VDC
    High Voltage Alarm: 16VDC
    Power Saver: Below 25 Watts when enabled
    Power Saver: Same Switched on/off on remote
    Charger Mode Specification
    Input Voltage Range: 85-140VAC
    Output Volgage: 15V Max
    Charger Current: 15Amps
    Battery Initial Voltage for Startup: 10-15.7V
    Over Charge Protection Shutdown: 15.7V
    Charger Curve (4 stage constant current)
    4 step digital controlled progressive charge
    Battery Type: Fast V Float V
    Gel U.S.A. 14 13.7
    A.G.M. 1 14.1 13.4
    A.G.M. 2 14.6 13.7
    Sealed Lead Acid 14.4 13.6
    Open Lead Acid 14.8 13.3
    Weight: 36Lbs (16Kg)